Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Yonkers, NY
Furnace repair in Yonkers typically costs between $150 and $650 depending on what has failed. Most common issues – a faulty ignitor, a bad flame sensor, a failing blower motor – are fixed in a single visit. Halden Heating and Air Yonkers gets the job done with a written price before any work starts, a live arrival time you can track to your door, and a 365-Day Done Right Promise on every repair.
Your furnace runs hard from October through April in Yonkers. Homes off Central Park Avenue, in Park Hill, and up through Crestwood all deal with the same reality: heating season stretches long, and a system that fails at 6:00 a.m. on a January Tuesday is not something anyone can ignore. We are the team that answers the phone at that hour. Every call to Halden Heating and Air Yonkers is answered by a live person, 24 hours a day, 7 days a week. No voicemail trees, no phone tag, no “leave a message and we’ll get back to you.”
For a broader look at how we handle Heating & Furnace systems across the board, that guide covers installations, maintenance, and the full range of services we offer in Yonkers.
When You Need Furnace Repair
Some furnace problems announce themselves loudly. Others whisper. Here are the signs that we see most often in Yonkers homes – and what they usually mean.
- Your furnace runs, but blows cold or lukewarm air. This is often a failed ignitor or a tripped limit switch. It can also signal a gas supply issue that should be checked by a professional immediately.
- Short cycling – the furnace fires up and shuts off every few minutes. Near the Saw Mill River and in older homes across Getty Square, we see this when heat exchangers overheat or filters stay clogged for months. Short cycling wastes gas and shortens the life of your unit.
- You smell gas. Leave the house and call your utility company first. Once the emergency is cleared, call us at (838) 213-7827 to find and fix the cause. Do not flip light switches or use electronics until the area is clear.
- Your furnace makes banging, scraping, or high-pitched whining noises. Banging in a home off Nepperhan Avenue usually points to expanding ductwork or a dirty burner. Scraping almost always means a blower motor going bad. Whining can signal a belt or bearing issue in older belt-drive systems.
- Your heating bills climb with no change in usage. A furnace that loses efficiency over one season typically has a dirty burner, a failing thermocouple, or a heat exchanger working harder than it should. In a Yonkers winter, that adds up fast on Con Edison bills.
- The pilot light will not stay lit or the electronic ignition will not engage. This is a classic bad thermocouple (the small sensor that shuts off gas when the pilot goes out) or a worn ignitor. It is a straightforward repair we handle every week in neighborhoods from Dunwoodie to Ludlow.
Furnaces involve gas, electricity, and fire. If you suspect a cracked heat exchanger or a gas leak, do not attempt a DIY repair. Carbon monoxide is colorless and odorless, and a cracked heat exchanger can leak it into your living space. We recommend calling a trained professional for any furnace issue beyond changing a filter. Our technicians are background-checked, trained, and carry carbon monoxide detection equipment on every call.
Our Furnace Repair Process
You will know what happens before it happens. That is the whole point. Here is how a Halden Heating and Air Yonkers furnace repair works, start to finish.
- You call or book online. When you call (838) 213-7827, a real person picks up – not a menu or a callback queue. Tell us what the furnace is doing. We help you decide if it is urgent or can wait a day.
- You get a live arrival time. Once we schedule the visit, you will see who is coming, what time they will arrive, and can track your technician to the door. This is not a four-hour window. It is a live arrival window with a specific technician assigned to your job.
- The technician diagnoses the issue on-site. They inspect the unit, identify the failed part or system, and explain what is wrong in plain English. If we say “flame sensor,” we will tell you what that is and why it failed.
- You receive a written price. Before a single tool is picked up, you will see the cost of the repair in writing. That is a locked number – no surprises at the door, no upsell pressure, no “while we are here” tactics.
- The repair happens, and we show you the work. We complete the repair with before-and-after photos so you can see exactly what was replaced or fixed. You approve the job before we leave.
- You get a written guarantee. Every repair is backed by the 365-Day Done Right Promise. If it fails within a year, we come back and make it right – and a second visit on a failed repair is free. That is what we mean by accountability, and it is what we put in writing on every single job.
Furnace Repair Pricing in Yonkers
Furnace repair prices in Yonkers vary by part and system. Most homeowners in this area pay between $150 and $650 for a typical repair. Here is what we see in neighborhoods from Lincoln Park to Van Cortlandt Crest.
| Repair Type | Typical Range in Yonkers |
|---|---|
| Flame sensor replacement | $150 – $250 |
| Ignitor replacement | $180 – $320 |
| Thermocouple replacement | $150 – $275 |
| Blower motor replacement | $350 – $650 |
| Gas valve replacement | $300 – $550 |
| Limit switch replacement | $150 – $300 |
| Heat exchanger evaluation | $100 – $200 diagnostic, quote on replacement separately |
These are honest ranges based on work we have completed across Yonkers. The final number depends on the brand of furnace you have – Carrier, Trane, Bryant, and American Standard are among the systems our technicians are certified to service – and how difficult access is. A blower motor in a snug closet off McLean Avenue takes longer to reach than one in an open basement. That reality shows up in the labor line item, and we will tell you that up front.
Every estimate is free. The written price you receive before work starts is the price you pay. That is true for every repair, every time, with Halden Heating and Air Yonkers.
Call (838) 213-7827 now for a free estimate on your furnace repair in Yonkers.
FAQs – Furnace Repair
How much does furnace repair cost in Yonkers?
Most furnace repairs in Yonkers cost between $150 and $650, depending on the part. A flame sensor replacement runs about $150 to $250, while a blower motor can be $350 or more. Halden Heating and Air Yonkers gives you a written price before any work starts, so you will know the exact number with no surprises. Call (838) 213-7827 for a free estimate.
Is it cheaper to repair or replace a furnace?
If your repair is under $650 and your furnace is under 12 years old, repairing almost always makes more financial sense. Replacement makes sense when the repair exceeds 50% of a new unit’s cost, or when your furnace is 15 to 20 years old and losing efficiency. We will tell you straight which side you are on – we do not push replacements when a repair will do the job.
Can you fix my furnace the same day?
Yes. We offer same-day furnace repair in Yonkers and answer the phone 24/7. When you call (838) 213-7827, a live person schedules your visit and gives you a live arrival time for a technician you can track to your door. Emergency evening and weekend service is available.
Does Halden Heating and Air Yonkers service my brand of furnace?
We hold certifications for major brands including Carrier, Trane, Bryant, and American Standard – the systems most common in Yonkers homes. If you have a different brand, call us anyway. The underlying components – ignitors, flame sensors, gas valves, blower motors – are largely universal, and our technicians work on them all.
What if the repair fails after you leave?
Every furnace repair from Halden Heating and Air Yonkers comes with a written guarantee, and a second visit to fix a failed repair is free. That is the 365-Day Done Right Promise, and it is a standard part of every job we do – not an add-on and not something you have to argue for. The guarantee is in writing, delivered with your completed work.
Do you charge for a diagnostic visit?
Diagnostic evaluations are free with a booked repair. If we come out and diagnose a furnace problem, you get a written price for the fix before any tools are picked up. If you decide not to proceed, you owe nothing for the visit. Our goal is a booked repair based on clear, honest pricing – not a gotcha service call fee.
Call (838) 213-7827 for an exact quote on your Yonkers furnace repair. Estimates are free, and answers come from a live person.
If you are dealing with broader Heating & Furnace in Yonkers issues – including installation, maintenance, and full system evaluations – that page walks through the complete range of what we handle.
Written by Andre Fuller, Owner at Halden Heating and Air Yonkers, serving Yonkers.