Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Yonkers Homeowners
Furnace repair in Yonkers typically costs between $150 and $700, and in most cases we can have a technician at your door the same day you call. When your heat cuts out on a January night off Central Park Avenue or up in the hills near the Saw Mill River Parkway, you need someone who answers the phone and gets moving. Halden Heating and Air Yonkers has been doing exactly that since 2004, with a live person on the line around the clock and a written price before any work begins. Led by Andre Fuller, our team of background-checked, uniformed technicians shows up with a live arrival time you can track, not a four-hour window. Call (838) 213-7827 and we’ll have someone on the way.
Yonkers winters put real strain on heating equipment. The temperature swings off the Hudson River mean your furnace cycles harder here than it would inland, and older systems in neighborhoods like Greystone, Ludlow, and Dunwoodie feel it first. When a blower motor seizes or an igniter cracks, you don’t need a sales pitch. You need a straight answer about what’s broken, what it costs, and when it’ll be fixed. That’s how we run our Furnace Repair in Yonkers.
Furnace Maintenance
Furnace Maintenance is the scheduled service that keeps your heating system from failing when Yonkers temperatures bottom out, and it runs $80 to $200 depending on what your system needs. A neglected furnace loses efficiency slowly, which means higher Con Edison bills and a heat exchanger working harder than it should. We clean the burners, test the igniter, check the flame sensor, measure the gas pressure, and inspect the heat exchanger for cracks that could leak carbon monoxide. Most manufacturers require annual maintenance to keep warranty coverage valid, and skipping it is the most common reason we see avoidable mid-winter breakdowns in Yonkers.
What a Halden Tune-Up Includes
Every maintenance visit includes a full safety check and a written report of what we found, what we fixed, and what might need attention before next season. Our technicians are not paid on what they sell, so you get an honest read on your equipment every time.
When to Schedule It
Book your furnace maintenance in September or early October, before the first cold snap hits Yonkers. That way any worn parts get replaced while the weather is still mild, not during the first sub-freezing night when every HVAC company in Westchester is booked solid.
Styles & brands we work with
Heat Pump Repair
Heat Pump Repair covers the outdoor condenser unit that handles both heating and cooling, and it typically runs $150 to $700 depending on the failing component. A heat pump in Yonkers works year-round, which means it accumulates wear faster than a furnace that sits idle half the year. Common failures include reversing valve issues, refrigerant leaks, failed capacitors, and compressor strain from short cycling. Because the same unit generates both warm and cool air, a heat pump problem is never just a heating problem or just a cooling problem. It’s a comfort problem in every season.
Signs Your Heat Pump Is Failing
If your heat pump runs constantly but the house never reaches the thermostat setting, or if you notice ice building up on the outdoor unit in winter, you’re likely looking at a refrigerant leak or a defrost control failure. Both get worse when ignored.
Yonkers Climate Considerations
The humidity off the Hudson accelerates corrosion on outdoor coil fins and electrical connections. We see more contactor and capacitor failures in riverside neighborhoods like Bryn Mawr and Homecrest than we do in more inland parts of the city, and we stock parts accordingly.
Heating Repair
Heating Repair is the general term for diagnosing and fixing whatever component has stopped producing or circulating warm air, and Yonkers homeowners should expect to pay $150 to $700 for most repairs. Every heating system, whether it’s a forced-air furnace, a boiler, or a heat pump, eventually needs a replacement part. Thermocouples wear out. Igniters crack. Circulator pumps seize. Pressure switches fail. The key is identifying the actual failed part the first time, not guessing and replacing parts until the problem goes away. That’s what separates a real diagnostic visit from a parts-swapping exercise.
Common Mid-Winter Failures
In Yonkers, we see a surge of heating repair calls every January when single-digit temperatures expose weak capacitors and aging blower motors. A motor that’s been humming along for 15 years may not survive the added strain of a deep freeze.
What You Should Expect
A proper heating repair visit includes a multi-point diagnosis: we test voltage, check airflow, measure temperature rise, and verify the safety switches before quoting any work. You get the written price before we touch a single component, and that price doesn’t change at the door.
Boiler Repair
Our Furnace Repair in Bronxville also covers boiler systems, but here in Yonkers, Boiler Repair handles the hydronic heating systems common throughout older neighborhoods, and most repairs fall between $150 and $700. Boilers operate differently than forced-air furnaces. Instead of heating air and blowing it through ducts, a boiler heats water and circulates it through radiators or baseboard units. That means different failure points: circulator pumps, zone valves, expansion tanks, pressure relief valves, and air separators. If your radiators are cold at the bottom or you’re hearing knocking sounds in the pipes, you likely have trapped air or a failing pump.
Two-Pipe and Steam Systems
Yonkers has thousands of older homes with one-pipe steam and two-pipe hot water systems, especially in neighborhoods like Park Hill, Crestwood, and down near Getty Square. These systems need a technician who understands pipe pitch, venting, and pressure settings, not someone who only works on ducted heat.
What Boiler Repair Costs Cover
The price range reflects the range of parts: a pressure relief valve replacement sits at the lower end, while a circulator pump or expansion tank replacement lands in the middle. A cracked heat exchanger is a different conversation entirely, and we’ll give you straight numbers on repair versus replacement before you commit to anything.
Gas Furnace Repair
Gas Furnace Repair focuses on the fuel-burning components of a natural gas heating system, and it runs $150 to $700 depending on the failed part. Gas furnaces have additional safety systems that electric systems don’t: pressure switches, flame rollout sensors, gas valves, and a heat exchanger that must be checked for cracks. Yonkers gas furnaces work hard in a region where overnight lows routinely drop into the teens. That’s why we test combustion safety on every gas furnace call, not just the ones where a homeowner reports smelling gas or hearing odd noises.
Safety First, Always
If you ever smell gas near your furnace, leave the house and call Con Edison first, then call us. Gas furnace repair involves combustion components that can be dangerous when handled incorrectly, and DIY attempts on gas valves or heat exchangers risk carbon monoxide exposure. We bring combustion analyzers and carbon monoxide detectors on every gas call.
What We Test
On every gas furnace visit we verify proper flame color, measure carbon monoxide levels in the flue, check draft, and inspect the heat exchanger for cracks. A cracked heat exchanger is a serious safety issue, and if we find one, we’ll show you photos before we discuss your options.
Furnace Tune Up
A Furnace Tune Up is a preventive visit that typically costs $80 to $200, and it catches the small problems before they become mid-winter emergencies. A tune-up is different from a repair: nothing is broken yet, but we’re looking for the parts that are about to fail. In Yonkers, where heating season runs roughly from mid-October through late April, that’s six full months of daily operation. No mechanical system runs that long without accumulating some wear, and the tune-up is your chance to replace a $40 capacitor before it takes out a $400 blower motor.
What We Check
We clean the flame sensor, inspect the igniter, check gas pressure, test the thermostat calibration, measure the temperature rise across the heat exchanger, and lubricate the blower motor if your system uses a lubricated design. The full checklist produces a written report you keep, so you know exactly what was inspected and what was found.
When a Tune-Up Isn’t Enough
If the tune-up reveals a component that’s already out of tolerance or a heat exchanger crack, we’ll stop and show you what we found with photos. You get a written price for any additional work, and you approve or decline before we touch anything else.
Emergency Furnace Repair
Emergency Furnace Repair is for the calls that can’t wait until morning, and Halden Heating and Air Yonkers answers those calls with a live person 24 hours a day, 7 days a week. Most emergency furnace repairs in Yonkers fall in the same $150 to $700 range as regular repairs, though complex issues with multiple failed components can run higher. The important thing is that someone picks up the phone at 3 a.m. when your heat is out and the temperature inside your house is dropping. No answering service, no voicemail tree, no call back tomorrow. You talk to a real person who can dispatch a technician.
What Counts as an Emergency
A furnace that has stopped working entirely during freezing weather is an emergency, especially if there are young children, elderly family members, or anyone with respiratory concerns in the house. A strange smell from the vents is also urgent. A furnace that’s working but making a new noise is a priority call, but may not require the emergency rate window.
What to Expect After You Call
Once our technician is dispatched, you’ll get a live arrival time you can track on your phone. The tech arrives in a uniform, introduces themselves, diagnoses the system, and presents a written price before any work begins. No overtime charges, no “emergency fees” added at the door. The price you approve is the price you pay, and every repair carries a written guarantee.
Brands We Service
Our technicians hold certifications covering Carrier furnaces, and we’ve spent two decades working on the Carrier 58 and Infinity line that’s common throughout Westchester County. Carrier’s high-efficiency condensing models have specific condensate management requirements, and we keep the parts and seals these systems need on our trucks. For Trane furnaces, we routinely service both the XR and XL series, including variable-speed blower motor replacements that other companies sometimes misdiagnose as full system failures. A Trane variable-speed motor is expensive enough that you want someone who’s tested hundreds of them before.
Bryant furnaces share design DNA with Carrier, which means many parts are interchangeable and quick to stock for Yonkers homes that run Bryant’s Evolution or Legacy lines. American Standard units are built for long service life, and we’ve seen well-maintained examples running past 20 years in Scarsdale and Eastchester homes. Whatever brand sits in your basement, whether it’s one of these or a Goodman, Lennox, Rheem, York, or Daikin, we carry the diagnostic tools and common parts to get it running again.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your furnace is running but the house is cold. If the unit fires up and air comes through the vents but the temperature never rises, you may have a failed blower motor, a dirty flame sensor, or a duct leak. The longer this runs, the harder the system works and the higher the utility bill climbs.
- You hear banging, scraping, or screeching sounds. A screech usually means a failing blower motor bearing. A bang can indicate delayed ignition in the burner assembly. Both are signs that components are failing under stress, not sounds that will simply go away.
- You smell a burning or metallic odor from the vents. A dusty smell on first startup of the season is normal. A persistent acrid or metallic burning smell is not. It can indicate overheating electrical components or a heat exchanger problem, and it warrants an immediate inspection.
- Your furnace short cycles on and off every few minutes. Short cycling stresses every component: the igniter, the gas valve, the blower motor, the control board. Common causes include an overheating limit switch, a clogged filter, or an improperly sized furnace. Each short cycle adds wear that shortens the system’s life.
- Your carbon monoxide detector has gone off. Even if you don’t have symptoms, a CO alarm that triggers during heating season is a stop-everything moment. Get fresh air into the house, turn off the furnace, and have a professional inspect the heat exchanger and flue before you use the system again.
Our Process, Step by Step
- 1
Book your appointment online or call (838) 213-7827. A live person answers around the clock, takes your details, and gets you scheduled. You don’t sit through a menu or leave your number for a callback. The person on the line can answer basic questions about availability and what to expect.
- 2
Track your technician in real time. Before we arrive, you receive a live arrival window and a tech profile with a photo. You’ll know who is coming, what they look like, and exactly when they’ll pull up. No watching for a van that might be there at noon or might be there at five.
- 3
Get a full diagnosis with real numbers. Our technician inspects the system, tests the components that typically fail, and shows you what’s going on before quoting anything. You get a written price with the exact parts and labor, and we don’t start work until you approve it.
- 4
Approve the repair and we fix it on the spot. Our trucks carry the common replacement parts for furnaces in Yonkers: igniters, flame sensors, capacitors, pressure switches, gas valves, blower motors, and control boards. Most repairs are completed in a single visit, and you see before-and-after photos of the work.
- 5
Your repair is covered by the 365-Day Done Right Promise. Every repair includes a written guarantee. If the same component fails within the coverage window, we come back and make it right at no charge. That includes a free second visit, automatically, with no fine print and no proof-of-purchase runaround.
How Much Does Furnace Repair Cost in Yonkers?
A typical Furnace Repair in Tuckahoe or Yonkers runs $150 to $700, with the final number driven by which component has failed and how accessible your system is. A flame sensor replacement or igniter swap sits at the lower end, usually $150 to $300 including labor. A blower motor or control board replacement lands at the higher end, often $400 to $700. Gas valve replacements typically fall in the middle. These are Westchester market prices, which trend higher than national averages because labor rates and parts availability in the New York metro area cost more than in lower-cost regions.
Several factors affect your price. The age and brand of your furnace determine parts cost: a 20-year-old system may require a discontinued part that costs more to source. The location of your furnace matters too: a unit in an easily finished basement is faster to work on than a unit squeezed into a Yonkers crawlspace or tucked in a low-clearance attic. Time of year plays a role as well; demand spikes every January in Westchester, which can affect parts availability and scheduling, though we hold our prices steady regardless of season. To avoid overpaying, get a written price before work starts, ask for the specific part name and number, and don’t approve a repair you don’t understand. Our free estimate includes the diagnostic visit, the written price, and the guarantee terms. You approve it or you don’t, and there’s no charge for the discussion either way.
Our Service Area Near Yonkers
Halden Heating and Air Yonkers serves the city of Yonkers and the surrounding Westchester communities including New Rochelle, Mount Vernon, Eastchester, Mamaroneck, Scarsdale, Tarrytown, Dobbs Ferry, Hastings-on-Hudson, Greenville, Pelham, and Tappan. Our central dispatch means typical response times run 60 to 90 minutes for most of the service area during business hours. We also provide Furnace Repair in New Rochelle and Furnace Repair in Mount Vernon with the same written-price guarantee and live tracking. From Riverdale Avenue to the Saw Mill, we’re close enough to get to you fast.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Yonkers
Furnace repair is the process of diagnosing and fixing a heating system that has stopped working correctly. A technician tests the electrical components, the gas or oil supply, the ignition system, and the airflow to identify the failed part, then replaces or repairs it. In Yonkers, most Furnace Repair in Mount Vernon and surrounding areas are completed in a single visit since our trucks carry the common replacement parts for local systems.
Most furnace repairs in Yonkers take between 45 minutes and two hours from diagnosis to completion. Simple fixes like a flame sensor cleaning or igniter replacement can be done in under an hour, while a blower motor or control board swap may take two hours or more. If we need a part we don’t have on the truck, we’ll order it and schedule a return visit, and we’ll give you a written estimate for the total before we start.
Furnace repair in Yonkers typically costs $150 to $700. The final amount depends on the failed component, your furnace’s brand and age, and how accessible the unit is. You’ll get a written price before any work begins, and that price includes labor, parts, and the written guarantee. Call (838) 213-7827 for an exact quote, and the diagnostic visit is free.
Yes, we service Carrier, Trane, Bryant, American Standard, Goodman, Lennox, Rheem, York, Daikin, and most other brands that are common in Westchester County homes. Our technicians are certified across multiple manufacturers and we stock OEM replacement parts for the most common systems in Yonkers. If your brand is older or unusual, we can usually source the part quickly.
Yes, Halden Heating and Air Yonkers answers calls with a live person 24 hours a day, 7 days a week, including holidays and nights. If your heat is out and the temperature is dropping, we’ll dispatch a technician as quickly as possible. Furnace Repair in Yonkers is one of our core services, and our emergency coverage comes with the same written-price guarantee as routine calls.
Every repair we complete includes a written guarantee, and it’s included automatically, not as an upsell. If the repair fails during the coverage window, we come back and fix it at no charge. That’s the 365-Day Done Right Promise: a full year of accountability on every completed job, with a free second visit if the first repair doesn’t hold.
Clear a path to the furnace so the technician has working room, and have a list of any unusual symptoms or sounds you’ve noticed, even if they come and go. If you have pets, please secure them before the technician arrives. If your home has a basement, attic, or garage furnace, have the area lit and accessible. That’s all we need. You don’t have to clean anything or move furniture.
Schedule Your Furnace Repair Service in Yonkers Today
If your heat is out or your furnace is making sounds it shouldn’t, call (838) 213-7827 now. A live person answers around the clock, day or night. You’ll get a real technician with a live arrival time you can track to your door, and a written price before any work begins. The diagnostic visit is free, there’s no obligation, and the repair comes with a written guarantee. If we can’t get your furnace running right, we make it right. That’s the Halden standard, and it applies to every call in Yonkers and the surrounding Westchester communities.
Written by Andre Fuller, Owner at Halden Heating and Air Yonkers, serving Yonkers since 2004.